FOR CONTINUOUSLY INSULATED STUCCO INSTALLATIONS
The 31⁄2” nailing flange serves as a flashing when water resistant breathable building paper or paper backed lath is installed over the flange. The holes in the “trough” offer minor moisture weeping capabilities; over window and door heads, base of walls or other conditions that require drainage.

DESCRIPTION
This screed is installed at the base of walls as part of a drainage system for Continuous Insulated stucco or stone applications.

MATERIALS
PVC to meet or exceed ASTM D1784 and D4216 with a minimum thickness of 0.050”.

AMICO recommends the use of accessories made from zinc alloy or PVC materials for all exterior applications

FIRE TESTING
Pass, NFPA 285-Multi-Story fl ammability test.

C-I Weep Trac PVC Accessory

FOR CONTINUOUSLY INSULATED STUCCO AND STONE INSTALLATIONS
The 31⁄2” nailing flange serves as flashing when weather resistant barriers or rain screen is installed over the flange. The holes in the “trough” offer moisture weeping capabilities; over window and door heads, base of walls or other conditions that require drainage.

DESCRIPTION
This C-I Weep TracTM is installed as part of a drainage system for Continuous Insulated stucco or stone applications. Corner beads may be used to return the scratch/finish coats into the wall.

MATERIALS
Zinc Alloy to ASTM B69 with a minimum thickness 0.020”.

AMICO recommends the selection of an appropriate type of material for accessories shall be determined by applicable surrounding climatic and environmental conditions specific to the project location, such as salt air, industrial pollution, high moisture, or humidity as stated in ASTM C1063.

FIRE TESTING
The assembly including C-I Weep TracTM meets NFPA 285-Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components.

C-I Weep Trac Zinc Alloy Accessory